“IMTC-Constructie” SRL has a great experience in projection, delivery and installation of hinged ventilated facades.
Hinged ventilated facades – are the integral part of the modern architecture. It is possible to solve different actual problems with the help of ventilated facades. It helps to simplify the works on reconstruction and construction of a building. Ventilated Facades – are the significant protection from unfavorable climatic conditions, city noise and aggressive environment, what is very important in the conditions of the big cities. The additional advantage, that ventilated facade gives, is the possibility of energy saving, heat saving, and also the possibility of realization of the original architectural solutions.
The separate plus of its application – high rate of installation works. Ventilated facades give a wide range of colour solutions and materials to the customer’s and architect’s choice.
The most known and the most practical material for ventilated facades – is the aluminium composite panel.
ALUMINIUM COMPOSITE PANELS in MOLDOVA
Aluminum Composite Panel (ACP) – this is constructional cladding composite material. The panels consist of two preliminary painted aluminium sheets with the thickness up to 0, 5 mm, between of each is pressed polymer sheet. The common bar thickness – from 3 up to 6 mm. Common use – exterior cladding with using of ventilated façade technology. It can be used also for interior washable, endurance cladding in the public places (trade centers, offices, airports, rail way stations, hospitals, restaurants and so on), for advertising constructions and temporary exhibition stands.
“IMTC-Constructie” SRL uses only qualitative, time-tested aluminium composite panels of the world’s manufacturers such as:
• ETALBOND (ELVAL-COLOUR SA, Greece);
• ALUCOBOND (3A Composites SA, Germany);
• DIBOND (3A Composites SA, Germany)
ETALBOND – MOLDOVAThis is a composite material, consisting of two aluminum sheets with the thickness of 0,5 mm each and thermoplastic filler, placed between sheets. The front side of the panel is painted by special technology (three layers PVDF) and is covered by protective film.
ALUCOBOND - MOLDOVA
This is a cladding construction material belonging to the category of composite material. For manufacturing the panels of this material two aluminum sheets with the thickness up to 0,5 mm are used. The polymeric sheet is pressed between them, produced on a base of polyethylene of a low pressure. Thereby the common thickness of Alucobond bar is 3,4 or 6 mm.
DIBOND - MOLDOVAThis is a sheet material of 2 – 6 mm thickness, consisting of polyethylene base, covered by two preliminary painted aluminium sheets of 0.3mm thickness. For safe installation and transportation, the surfaces of the sheets are covered by protection film.
"Choosing ventilated facades, be sure that the company« IMTC-Constructie »SRL guarantees you prompt delivery of materials, high quality mounting structures and individual look of your building!"